CRANE TRUCKS

• 2001 Volvo WG64 Tri-Axle Crane Truck, Cummins ISM370 Diesel,

            Fuller 8 Sp. Hi-Lo Trans., 46,000# Rears, w/ CMI 4010 Telescopic Hyd. Crane,

            20’ Boom, 10’ JIB w/ Remote Control, 22’ Platform Body •

• 2000 Volvo WG64 Tri-Axle Crane Truck, Cummins N14 Diesel,

            Fuller 8 Sp. Hi-Lo Trans., 46,000# Rears, w/ CMI 4010 Telescopic Hyd. Crane,

            20’ Boom 10’ Jib w/ RemoteControl, 22’ Platform Body •

• 2000 Western Star 4964F Tri-Axle Crane Truck, CAT 3406E Diesel,

            Fuller 8 Sp. Hi-Lo Trans., 46,000# Rears w/ USTC 150-26 SIDE-O-MATIC

            75 Ton Telescopic Hyd. Crane, 26’ Boom, Remote Control, 21’ Platform Body •

• 1997 Volvo WG64 T/A Crane Truck, Detroit 60 Diesel, Fuller 8 Sp. Hi-Lo Trans.,

            46,000# Rears, w/ USTC 110-25 SIDE-O-MATIC, 5 Ton Hyd. Crane,

            35’ Boom, I2 Platform Body •

• 1992 Volvo WG64 T/A Crane Truck, Cummins N14 Diesel,

            Fuller 8 Sp. Hi-Lo Trans., 46,000# Rears, w/ USTC 300-25

            Telescopic Hyd. Crane, 15 Ton, 16’ Boom, 18’ Platform Body •

• 1992 Freightliner FLC112SD T/A Crane Truck, Cummins N14 Diesel,

            w/ Proko Telescopic Hyd. Crane, 8 Ton, 20’ Boom, Remote, 22’ Platform Body •

• 1988 Mack RD690 T/A Crane Truck, Mack 300 Diesel, Maxitorque 7 Sp. Trans.,

            44,000# Rears, w/ USTC 110-26 SIDE-O-MATIC Hyd. Crane 5½ Ton,

            26’ Boom, Remote, 17’ Platform Body •

• 1985 Mack DM6855 T/A Crane Truck, Mack 235 Diesel, Maxitorque 7 Sp. Trans.,

            w/ USTC 110-35 Telescopic Hyd. Crane, 5½ Ton, 35’ Boom, Remote, 17’ Platform Body •

TRUCK TRACTORS

• 2000 Western Star 4964F T/A Tractor, CAT 3406E Diesel,

            Fuller 8 Sp. Hi-Lo Trans., 46,000# Rears, Air Ride, Hyd. Wet Sys. •

• 1998 Western Star 4964F T/A Tractor, CAT 3406E Diesel,

            Fuller 8 Sp. Hi-Lo Trans., 44,000# Rears, Air Ride, Hyd. Wet Sys. •

• 1992 Volvo WCM64T T/A Tractor, CAT 3406B Diesel,

            Fuller 8 Sp. Hi-Lo Trans., 44,000# Rears, Hyd. Wet Sys. •

• 1985 GMC General T/A Tractor, DET 8V92 Diesel,

            Fuller 13 Sp. Trans., 44,000# Rears, Hyd. Wet Sys. •

FLATBED TRAILERS

• 2000 Transcraft Super Beam 45’ Tri-Axle Flatbed, Mod. TL3000WZ,

            Air Ride w/ USTC Hyd. Boom Crane, Outriggers & Remote •

• 1989 Dorsey 42’ T/A Flatbed, Alum. Tool Boxes

w/ USTC Hyd. Boom Crane PC16-22, Outriggers & Remote •

• 1982 Raven 42’ T/A Flatbed, Air Ride •

• 1982 Strick 45’ T/A Flatbed w/ Center Mounted Hyd. Boom Crane •

DROP DECK TRAILERS

• 1998 Talbert 48’ Drop Deck, 20 Ton Cap., Air Ride •

• 1977 42’ Drop Deck Trailer, T/A •

EQUIPMENT TRAILERS

• 2000 Custom 20’ T/A Trailer, 27 Ton Cap., Air Ride •

• (2) 1999 Custom 24’ T/A Trailers, 20 Ton Cap., Air Brakes •

• 1997 Custom 25’ T/A Trailer, 20 Ton Cap., Air Brakes •

• 1989 Custom 25’ T/A Trailer, 20 Ton Cap., Air Brakes •

• 2003 Hudson 19’ T/A Trailer, 5 Ton Cap., Elec. Brakes •

FORKLIFTS

• Taylor 52,000# Cap, 2WD, 6 Cyl. Diesel Engine, 240” Lift Ht.,

            12’ Forks, Auto Side Shift, EROPS, Mod. TE-520M, S/N S-W5-20563, 6759 Hrs. •

• Palfinger CR50 Craylor Diesel Tri-Wheel Forklift, 4000# Cap.,

146” Lift Ht., ROPS, Pneu. Tires, 295 Hrs. •

• Sellick 10,000# Cap., 4WD, Diesel, 216” Lift Ht., Enclosed Heated Cab.,

            Side Shift, Mod. SD100, S/N 38869061032, 6371 Hrs. •

• JCB 8,000# Cap., 4WD, Diesel. 30’ Lift Ht., Enclosed Heater Cab., Side Shift,

            Mod. 940, S/N SLP94004TE0661542, 12,800 Hrs. •

• (5) CAT R80 8,000# Cap., 2WD, 192” Mast, Diesel, Sideshift, EROPS, Heated Cab. •

• Clark 15,000# Cap., 2 Stage Mast, Gas, Sideshift, EROPS, Mod. C500Y150 •

• Clark 20,000# Cap., 2 Stage Mast, Sideshift, EROPS, Mod. CY200 •

• Clark 20,000# Cap., 2 Stage Mast, Sideshift, EROPS, Mod. CY200CD •

• Clark 8,000# Cap., Diesel, 2 Stage Mast, Sideshift, Pneu. Tires, ROPS •

• Hyster, 4,000# Cap., Gas, 2 Stage Mast, Sideshift, Pneu. Tires, ROPS •

WHEEL LOADERS

• John Deere 544C Wheel Loader, Diesel, 2Yd. GP Bucket,

            17.5-25 Front & Rear Tires, 3917 Hrs., S/N 544CB407102 •

• John Deere JD544 Wheel Loader, Diesel, 1½ Yd. GP Bucket,

            15.5-25 Front & Rear Tires, 1981 Hrs., S/N 075065 •

SCISSOR LIFTS

• Marklift Scissor Lift, 4’ x 9’ Platform w/ Built In Charger •

• Platform Scissor Lift, 3½’ x 5½‘ Platform w/ Built In Charger •

MANLIFT

• Calavar Condor Telescopic Manlift, Mod. 6066, 2WD, Gas, 3818 Hrs., S/N IT-7225002 •

SWEEPER TRUCK

• 1987 Ford 800 Street Sweeper, AT, V8 w/ Sunvac

            Force Four Sweeper & Peabody Myers Vac., 3375 Hrs. •

SUV’S

• 2005 GMC Yukon, 4 Dr, 4WD, AT, AC, Full Power, Cruise,

Tilt, CD Player, 5.3 Litre Gas •

• 2005 GMC Envoy SLT, 4 Dr., 4WD, AT, AC, Full Power, Cruise,

Tilt, Sunroof, CD Player, 5.3 Litre Gas

PICKUP TRUCKS

• 2005 GMC Sierra 1500, 4x4, Extended Cab, 4 Dr.,

PW, 6’ Bed, Trac Rac, AC, Cruise, Tilt •

• 2004 GMC Sierra 1500, 4x4, Extended Cab., 4 Dr.,

PW, 6’ Bed, V8, AT, Alum Trac Rac w/ 8’ Hyd. Snow Plow Attachment •

• 2004 GMC Sierra 1500, 4x4, Extended Cab., 4 Dr.,

            PW, 6’ Bed, V8, AT, w/ Tool Box & 8’ Hyd. Snow Plow Attachment •

• 1997 Chevy Cheyenne 1500, 4x4, 4WD, 8’ Bed,

AT, AC, AM/FM Stereo Cassette w/ Fisher S.S. 2 Yd. Sander, 5 H.P. •

VAN TRUCKS

• 2004 Ford E450 18’ Box Truck, AT, AC, V8, Dual Wheels, Roll-Up Door, AM/FM Stereo CD Player •

• 2000 Chevy 3500, 15’ Box Truck, AT, AC, V8, Dual Wheels, Roll-Up Door, AM/FM Stereo •

DUMP TRUCKS

• 1978 Ford 9000 T/A Diesel, Fuller 13 Sp. Trans., 13’ Heated Dump Body •

FLATBED TRUCK

•  1987 General 30’ Tri-Axle, CAT 3406B Diesel, Spicer 7 Sp. Trans., 44,000# Rears •

METALWORKING MACHINES

• Buffalo 20 Ton Hyd. Ironworker, Mod. 1/2 , S/N 54W11760 •

• Rod Chomper Rebar Cutter, 3 Ph. •

• Arnold Rebar Bender, #3-11, w/ 11’ Infeed & 7’ Outfeed Tables •

• Wallace 26” Abrasive Cut-Off Saw, Mod. 2600 w/ Hyd. Pump •

• Pan Handle 4 Yd. Bender • Rebar Benders • Etc. •

SAWS

• Yates American 36” Vert. Wood Bandsaw, Mod. V36 •

• Powermatic 10” Port. Table Saw, 1 H.P., 1 Ph. •

• Craftsman 12” Vert. Bandsaw, 1 H.P., 1 Ph. •

• 16” Power Hacksaw, 3 Ph. •

DIAMOND CORE DRILLING MACHINES

• NPC Hydroker 4 Spindle Diamond Core Drilling Mach.,

            Mod. 90815, S/N 97116 w/ 90” Rotary Table & Controls •

• (2) NPC Port. Pneu. Core Bore Drills, Gas •

                  (50) Diamond Core Drill Bits, 6”-32”

MOLDS

Lg. Qty. Cleco Concrete Molds Including:

            • Manhole Molds, 3’, 4’, 5’, 6’, 8’ Diam. • ECC Cones •

• 10’ Road Barriers • Street Curbing Straight & Radius •

• Septic Tank 1000, 1500 & 2000 Gal. • Flow Diffusers •

• Spillman 38Y Utility Mold 6’ x 12’ • Pump Tanks •

• 7’ x 16’ Tank Molds • Catch Basins • Headers •

• Hole Formers 4’ – 6’ Diam. • Grade Rings 2” – 12” •

• Transformer Pad & Utility Molds • Light Pole Molds •

• Boat Ramp & Parking Curb Molds • Patio Pads •

• Mega & Mini Block Molds • Etc. • Etc. • Etc. •

 Lg. Qty. Mold & Form Accessories

FORMS

• (1000) Advance Concrete Panel Forms, 4’ – 8’ x Ass’t Widths

            Including Inside & Outside Corners & Accessories •

OVERHEAD BRIDGE CRANES

• Dwight Foote 15 Ton Double Girder, 60’ Span w/ 15 Ton Elec. Hoist, Remote Controls •

• Dwight Foote 10 Ton Double Girder, 30’ Span w/ Wright 10 Ton Elec. Hoist, Remote Controls •

• (2) Dwight Foote 10 Ton Single Girder, 60’ w/ Kone 10 Ton Elec. Hoist, Remote Controls •

• 3 Ton Single Girder, 36’ Span w/ Yale 3 Ton Elec. Hoist, Pendant Controls •

• 3 Ton Single Girder, 36’ Span w/ Coffing 3 Ton Elec. Hoist, Pendant Controls •

COMPRESSORS

• Gardner Denver Rotary Screw Air Compr., 30 H.P., 3 Ph. •

• I.R. Tri-Stage Air Compr., 25 H.P., 3 Ph. •

CONCRETE BATCH MIXING SYSTEM

• Jonel Computerized Batch Mixing Sys. w/ (2) Besser 1 & 2 Cubic Yd. Mixers,

            Traveling Weigh Batcher & Jonel Controls •

  Donaldson Torit Dust Collector w/ Blowers & Motors

MISCELLANEOUS MACHINERY

• Southern 30 Ton Hyd. Shop Press •

• Milw. Electrostatic Drill Press •

• Cummins 14” Drill Press, Fl. Type •

• Wilton 6” Belt/10” Disc Sander •

• Jet 6” D.E. Bench Grinder •

• Craftstman 8” D.E. Bench Grinder •

• (2) Grayco Magnum Port. Paint Sprayers XR-5 •

• Miller XMT304, CC/CV Tig Welder •

• Miller 300 Amp Port. AC/DC Arc Welder •

• Lincoln 250 Amp Port. AC Arc Welder •

• Airco 200 Amp Port. Arco Welder, Mod. Bumblebee •

• ESAB Plasma Cutter • Northern Port. Elec. Pipe Threader w/ Dies •

• Port. Pneu. Sandblaster • Etc. • Etc. •

SUPPORT EQUIPMENT

Gd. Qty. Rigging Equipment Including:

            Lifting Bars, Cables, Hooks, Slings, Snatch Blocks & Chains •

• Concrete Vibrators • Hammer & Elec. Drills • Milw. Sawzall •

• Milw. Port. Elec. Bandsaw • Chainsaws • Sabre Saws •

• Pneu. Hammers, Chisels, Grinders, Drills & Nailers •

• Impact & Torque Wrenches • Vises • Pipe Threaders & Wrenches •

• Port-O-Power Units • Cut & Weld Outfits • Bolt Cutters •

• Chain Binders • Come-A-Longs • Wheel Pullers • Tap & Die Sets •

• Port. Hyd. Floor & Transmission Jacks • Bottle Jacks •

• Port. Strapping Mach. • Honda Gas Generator • Air Hose Reels •

• Hyd. Pumps • Ass’t Test Equipment • Etc. • Etc. •

• (2) Pro Tech 12’ Snow Pushers • 9’ & 11’ Snow Plows •

• Concrete Dump Hoppers • Concrete Block Crane Attachments, 6000# Cap. •

• Country 16’, 1 Ton Jib Crane w/ 2 Ton Elec. Hoist •

• (24) Sections 8’ & 9’ H.D. Steel Pallet Racking •

• Step, Stock & Ext. Ladders • Shop Fans • Met. Shelving • Workbenches • Lockers • Etc. • Etc. •